PACKNORI

Home / Sanitary pad packing machine

Automatic bag feeding

L085Sanitary pad packing machine

Bags sanitary pads in pre-made pouches, 18–20 packs a minute.

It picks a bag from a 400-bag magazine, opens it, pushes in 6–10 pads, then seals and trims. Square corners come from a mould made for your pack.

A packing machine, not a pad making machine. It bags the finished pads that come off your production line.

Output
18–20packs/min
Per pack
6–10pads, flat or standing
Bag magazine
≈ 400pre-made bags

Send my packWatch it run

Before you pay anything

Your pack, on video, before you order.

Price lists look the same everywhere. A video of a carton or pack like yours, run on the machine you would buy, does not.

  1. 1Your size

    ××mm

    Type your carton size. Add a photo of it open and closed.

    Finished pack size and pads per pack. Add a photo of the pack.

  2. 2We cut a blank to that sizeWe run the closest size and draw your mould

  3. 3You get the video, then the price

    Factory footage of the CK-E022-1: loading, gluing, then a sealed carton pulled open to show the glue. Your video shows your carton.

    Factory footage of the L085: pads in, pack formed and sealed, finished packs in hand. Your video shows the closest pack size we have.

With the video comes the price, lead time and shipping for a machine set up for that size.

Send this sizeBook a live video call

Prefer to see it live? Ask for a video call and watch the machine run on the factory floor.

See it pack sanitary pads.

Six steps, each with factory footage of the same step on the L085.

  1. 01

    Set the sealing heat.

    The touch screen runs the machine. The two temperature controllers beside it hold the seal at the heat you set; the maker's sheet lists 100–200 °C.

    Factory
  2. 02

    Bags feed themselves.

    Pre-made printed bags stack in a magazine that holds about 400. The machine picks them one at a time, so the operator only tops it up now and then.

    Factory
  3. 03

    Open the bag, push the pads in.

    The operator lays 6–10 pads in the slot, flat or standing. The machine opens a bag and a servo pusher slides the pads in. The push can be set softer or firmer to avoid bursting the bag.

    Factory
  4. 04

    Corners, seal, trim.

    A mould made for your pack holds the bag by suction while air cylinders tuck in the corners. A temperature-controlled head seals the end, and a hardened D2 steel knife trims off the waste edge.

    Factory
  5. 05

    Out on the belt.

    Finished packs leave on the outfeed belt, 18–20 a minute on the maker's rating, ready for the carton.

    Factory
  6. 06

    Check a pack.

    Square corners and a trimmed seal. The corner mould is made for one pack size: for a new size you change the mould instead of re-adjusting the machine.

    Factory
Watch the whole factory video (52 seconds)

L085 at the factory, 52 seconds, ending with finished packs in hand.

After the making line.

A sanitary pad making machine turns pulp, non-woven and film into finished pads. The L085 takes over from there: counted pads go into its slot, and it picks a pre-made pouch, opens it, pushes the pads in, seals and trims.

If you bag pads by hand today, or your current bagger cannot keep up, this is the machine. If you are just starting pad production, you need a making line first; the L085 packs what it produces.

Also called

  • sanitary napkin packing machine
  • sanitary pad packaging machine
  • sanitary pad pouch packing machine
  • sanitary napkin bagging machine
  • máquina embaladora de absorvente
  • máquina empacadora de toallas sanitarias
  • mesin pengemas pembalut wanita
  • máy đóng gói băng vệ sinh
  • ماكينة تغليف الفوط الصحية

Specifications

From the maker's L085 sheet. We confirm the final values for your order.

Output18–20 packs/minmaker's rating
Pads per pack6–10lying flat or standing on edge
Pack sizeL 100–200 × W 60–150 × H 35–100 mm
BagsPre-made bagsmagazine holds about 400
SealingTemperature-controlled seal head, 100–200 °Cedge trimmed by a D2 steel knife
Drives5 servo motors3 × 0.75 kW, 2 × 0.4 kW
Power220 V, 50 Hzvacuum fans 1.5 kW + 0.4 kW
Compressed air0.6–0.8 MPa
Machine size3,150 × 1,250 × 1,650 mm
WeightAbout 1.2 t
Warranty1 year
Minimum order1 machine
Trade termFOB Xiamenother terms quoted on request

Why buyers pick it

  1. Bags fed automaticallyBags are picked, opened, filled, sealed and trimmed by the machine, from a magazine of about 400.
  2. Servo push, adjustable forceThe push into the bag is servo-driven and its force is adjustable. The maker states the pads go in straight without bursting the bag; we check it on your pads.
  3. Neat, square cornersA mould made for your pack holds the bag by vacuum while air cylinders tuck the corners.
  4. Quick size changeSwap the mould instead of re-adjusting the machine.
  5. Clean sealTemperature-controlled seal head and a hardened D2 steel trim knife for a flat edge.

Questions buyers ask

Something else? Ask in the form below.

What is the sanitary pad machine price?

There are two kinds of sanitary pad machine. A making machine forms the pads from pulp and non-woven; a packing machine like the L085 puts the finished pads into bags. We sell the packing machine, quoted per order because the forming mould is made for your pack. Send your pack size, pads per pack and country in the form below and we reply by email with the price, lead time and shipping cost.

What is the warranty, minimum order and trade term?

Each machine has a one-year warranty. The minimum order is one machine. We quote FOB Xiamen; if you need another term, such as CIF to your port, say so in the inquiry and we quote it.

Does the L085 make sanitary pads?

No. The L085 packs pads that are already made. It sits after your pad-making line, or after the hand counting station, and bags 6–10 pads per pack.

Can you show me my pack on the machine before I order?

Yes. Send your finished pack size, pads per pack and a photo. The forming mould is made for each pack, so we send a video of the L085 packing the closest pack size we have, and the mould drawing for yours, before you order.

How many packs per minute?

18–20 packs per minute is the maker's rating. Real output depends on your pads, bags and how quickly the slot is filled, so we confirm it on your sample.

What pack sizes does it handle?

Finished packs from 100–200 mm long, 60–150 mm wide and 35–100 mm high, with 6–10 pads per pack. Pads can lie flat or stand on edge in the bag.

Is it fully automatic?

The bagging is automatic: the machine picks a pre-made bag from the magazine, opens it, pushes the pads in, seals and trims. Counted pads are placed into the slot by hand or from your upstream line.

How do I change to another pack size?

You swap the forming mould instead of re-adjusting the machine. Each mould is made for your pack, which keeps the corners neat and the changeover quick.

What bags does it use?

Pre-made bags, held about 400 at a time in the magazine, so the operator refills rarely. Tell us your bag material and size and we check it.

What does it need on site?

220 V, 50 Hz power, compressed air at 0.6–0.8 MPa, and floor space of about 3.2 × 1.3 m. The machine weighs about 1.2 tonnes.

Can I watch it run on a live video call?

Yes. Ask in the form or on WhatsApp and we set a time to show the machine running on the factory floor.

How is it set up in my factory?

It ships assembled and tested, with the mould for your pack. We guide installation and operator training by video call and send the manual and electrical drawing with the machine. If you need an engineer on site, ask and we quote it.

Which spare parts should I keep?

The parts that wear are the seal parts, the trim knife, the vacuum cups and the belts. We list them with the quote and can ship a spare kit with the machine.

Does it work on 60 Hz or 110 V power?

The standard build is 220 V, 50 Hz. Many buyers in Latin America, the Middle East and the Philippines have 60 Hz or different voltages: tell us your supply in the form and we confirm what can be built before we quote.

Which countries do you sell to?

We quote buyers in Latin America (Mexico, Colombia, Peru, Brazil and others), the Middle East (Saudi Arabia, UAE, Egypt), Southeast Asia (Indonesia, Vietnam, the Philippines, Malaysia) and India, with shipping to your port.

Send your size

Send your pack. We show you how it will look.

Tell us your pack size, pads per pack and where it ships. We send a video of the closest pack we run and the mould drawing for yours, then the price, lead time and shipping.

  • After you send, reply to our email with a photo of your current pack.
  • Rather see it live? Pick “A live video call” in the form.

Which machine?
What do you want first?

Fill in your name, email and machine, then send.

Send my pack