PACKNORI
CK-E022-1 hot melt box sealing machine with stacks of sealed printed boxes on the packing table
Loading 3D…

Home / Box sealing machine

Semi-automatic · spray hot melt

CK-E022-1Hot melt glue box sealing machine

Seals printed cartons with spray hot melt glue, 60–90 a minute. For tissue, food and cosmetic cartons with end flaps.

Output
60–90cartons/min
Carton size
≤ 300 mm110–300 × 80–200 × 30–90
Power
220 V50 Hz · plus 0.5 MPa air

Or book a live video call of the real machine →

Your box mm

3D illustration of the CK-E022-1, slowed down at the glue gun. Factory video below ↓

Before you pay anything

Your box, sealed on video, before you order.

Price lists look the same everywhere. A video of a carton or pack like yours, run on the machine you would buy, does not.

  1. 1Your size

    ××mm

    Type your carton size. Add a photo of it open and closed.

    Finished pack size and pads per pack. Add a photo of the pack.

  2. 2We cut a blank to that sizeWe run the closest size and draw your mould

  3. 3You get the video, then the price

    Factory footage of the CK-E022-1: loading, gluing, then a sealed carton pulled open to show the glue. Your video shows your carton.

    Factory footage of the L085: pads in, pack formed and sealed, finished packs in hand. Your video shows the closest pack size we have.

With the video comes the price, lead time and shipping for a machine set up for that size.

Send this sizeBook a live video call

Prefer to see it live? Ask for a video call and watch the machine run on the factory floor.

See it seal a carton.

Six steps, each shown twice: a 3D drawing of what happens inside the machine, and factory footage of the same step on the CK-E022-1.

  1. 01

    Type the size. The belts move.

    Enter the carton's length, width and height on the touch screen. With the line empty, motors move the two infeed belts to the length and the top belts to the height.

    3D drawing, step 1: Type the size. The belts move.
    3D · how it works
    Factory
  2. 02

    Fold by hand, leave one flap.

    The operator folds the dust flaps and the lower flap at each end, and leaves the top flap open.

    3D drawing, step 2: Fold by hand, leave one flap.
    3D · how it works
    Factory
  3. 03

    Drop it between the belts.

    The carton goes into the channel between the two upright belts. They grip its ends and carry it in.

    3D drawing, step 3: Drop it between the belts.
    3D · how it works
    Factory
  4. 04

    Glue on the flaps.

    Air-opened guns on both sides spray hot melt onto the lower flaps as the carton passes.

    3D drawing, step 4: Glue on the flaps.
    3D · how it works
    Factory
  5. 05

    Fold, press, out.

    A steel guide folds the last flap onto the glue, and the side belts hold it shut while the glue sets. The carton comes out sealed.

    3D drawing, step 5: Fold, press, out.
    3D · how it works
    Factory
  6. 06

    Pull one open.

    The flaps are held by glue, with no tape on the box. Tearing a sealed carton open shows where the glue sits.

    3D drawing, step 6: Pull one open.
    3D · how it works
    Factory
Watch the whole factory video (51 seconds)

CK-E022-1 at the factory, 51 seconds. At the end a sealed carton is pulled open to show where the glue sits.

Glue, not tape.

A tape carton sealer closes brown shipping cartons with packing tape. The CK-E022-1 does a different job: it sprays hot melt glue on the end flaps of printed folding cartons, such as tissue boxes, food boxes and cosmetic or medicine cartons, then folds and presses them shut. No tape shows, so the box goes straight to the shelf.

If you seal shipping cartons, buy a tape sealer. If you close printed retail boxes by hand or with glue today, this is the machine.

Also called

  • hot melt carton sealing machine
  • carton glue sealing machine
  • semi automatic carton sealing machine
  • tissue box packing machine
  • hot melt box sealing machine
  • seladora de caixas de papelão com cola quente
  • cerradora de cajas con hot melt
  • selladora de cajas con hot melt
  • mesin lem karton hot melt
  • máy dán hộp carton keo nóng
  • ماكينة لصق الكراتين بالغراء الحراري

Specifications

From the maker's CK-E022-1 sheets. We confirm the final values for your order.

Output60–90 cartons/minmaker's rating; real speed depends on carton and loading
Carton sizeL 110–300 × W 80–200 × H 30–90 mmmodel sheet also lists L from 100 and W up to 250 mm
OperationSemi-automaticoperator loads, machine glues, folds, presses
Glue systemSpray hot-melt, 1–2 heated hoses7 kg glue unit, PID temperature control, auto heat-keeping
Glue temperature180–200 °C
Power220 V, 50 Hz3.8 kW sealer + 2.0 kW glue unit
Compressed airAbout 0.5 MPafor the glue unit
Machine size3,190 × 700 mm footprintabout 1.8 m tall with the glue unit on top
WeightAbout 300 kgglue unit about 38 kg
NoiseUnder 50 dBmaker's rating
Warranty1 year
Minimum order1 machine
Trade termFOB Xiamenother terms quoted on request

Why buyers pick it

  1. One-piece frameSealer and glue unit ride on one body, so it runs steady and cartons are easy to place.
  2. Spray, not rollerThe glue gun never touches the flap. The maker rates it at over 500 shots a minute without stringing or dripping, and the gun cleans itself.
  3. Less glue topping-upA 7 kg tank that melts and keeps its temperature on its own; the maker states it runs at a lower heat.
  4. Over-temperature cut-offIf the glue overheats, an alarm sounds and the heater switches off.
  5. Little smoke or smellThe maker states the spray system runs without the smoke smell of an open glue pot.

Questions buyers ask

Something else? Ask in the form below.

What is the price of a hot melt glue box sealing machine?

We quote per order because the price depends on the carton, voltage and destination. Send your carton size and country in the form below and we reply by email with a price, lead time and shipping options.

What is the warranty, minimum order and trade term?

Each machine has a one-year warranty. The minimum order is one machine. We quote FOB Xiamen; if you need another term, such as CIF to your port, say so in the inquiry and we quote it.

Can you seal my carton as a test before I order?

Yes. Send the carton size, a photo of it open and closed, and whether it is filled when sealed. We cut blank cartons to your size, seal them on the CK-E022-1 and send you the video. If your size is at the edge of the range, this test is how we confirm it.

What box sizes can it seal?

Length 110–300 mm, width 80–200 mm and height 30–90 mm is the standard range. The model sheet also lists down to 100 mm long and up to 250 mm wide; for those sizes we confirm with your sample carton first. Use the size check above to see where your carton sits.

How many boxes per minute?

The maker rates it at 60–90 cartons per minute. Your real speed depends on the carton and how fast the operator loads it, so we confirm it on your sample.

Is it fully automatic?

No, it is semi-automatic. An operator places each carton on the infeed; the machine sprays the hot-melt glue, folds the flaps, presses them and sends the sealed carton out.

Can I watch it run on a live video call?

Yes. Ask in the form or on WhatsApp and we set a time to show the machine running on the factory floor.

What does it need on site?

220 V, 50 Hz power (3.8 kW for the sealer plus 2.0 kW for the glue unit) and compressed air at about 0.5 MPa for the glue unit. Floor space is about 3.2 × 0.7 m. Other voltages: ask us.

Spray glue or roller glue: why spray?

The spray guns put a thin, even line of hot-melt on the flap without touching it. The maker states the guns open with air, do not string or drip, and clean themselves. The glue unit holds 7 kg and keeps its temperature with PID control.

What kind of boxes is it for?

Printed folding cartons with end flaps, such as tissue boxes, food boxes and cosmetic or medicine cartons. The factory videos show empty cartons; if yours is filled before sealing, send a sample and we check it.

Is this the same as a tape carton sealer?

No. A tape carton sealer closes brown shipping cartons with packing tape. The CK-E022-1 glues the end flaps of printed retail boxes with hot melt, so the box stays clean for the shelf. For shipping cartons, a tape sealer is the right machine.

How is it set up in my factory?

It ships assembled and tested. We guide installation and operator training by video call and send the manual and electrical drawing with the machine. If you need an engineer on site, ask and we quote it.

Which spare parts should I keep?

The parts that wear are the glue gun nozzles, the heating parts and the conveyor belts. We list them with the quote and can ship a spare kit with the machine.

Does it work on 60 Hz or 110 V power?

The standard build is 220 V, 50 Hz. Many buyers in Latin America, the Middle East and the Philippines have 60 Hz or different voltages: tell us your supply in the form and we confirm what can be built before we quote.

Which countries do you sell to?

We quote buyers in Latin America (Mexico, Colombia, Peru, Brazil and others), the Middle East (Saudi Arabia, UAE, Egypt), Southeast Asia (Indonesia, Vietnam, the Philippines, Malaysia) and India, with shipping to your port.

Send your size

Send your carton. We send the video.

Tell us your carton size and where it ships. We seal a carton like yours on the CK-E022-1, send you the video, then the price, lead time and shipping.

  • After you send, reply to our email with photos of the carton open and closed.
  • Rather see it live? Pick “A live video call” in the form.

Which machine?
What do you want first?

Fill in your name, email and machine, then send.

Send my carton